CHAPTER 4: TROUBLESHOOTING
4.4 Troubleshooting – Incline Motor Issues
Symptom:
The incline motor does not move up or down when prompted.
Reason:
1. The keypads are defective.
2. The incline motor is defective.
3. The MCB is defective.
Solution:
1. Check if the console beeps when the incline keys are pressed. If not, troubleshoot the keypads as
outlined in Section 4.2.
2. Enter Engineering Mode (See Section 2.1), and scroll to ENG 1 (Hardware Test). Press the ENTER
key.
a. Press the INCLINE
b. If beeps can be heard from the 2 relays at the MCB, the MCB is ok. Check the connection of the
incline motor at the MCB, if this is good, replace the incline motor.
3. If the relays do not beep when the INCLINE UP or DOWN keys are pressed, or if the
incline motor does not resolve the issue, replace the MCB.
UP and DOWN
keys.
11