Safety During The Operation Of Electric Appliances - Wacker Neuson EH 6 Operator's Manual

EH 6, EHB 7
Safe working with the hammer
Keep the tool holder closed during operation.
Guide the power cable always from the machine to the rear and keep it away
from the working range of the machine.
3.7

Safety during the operation of electric appliances

Specific regulations for electrical appliances
Observe the safety information provided in the brochure General Safety Rules
which is included in the scope of delivery of your machine.
Also observe the country-specific regulations, standards and guidelines in refer-
ence to accident prevention in connection with electrical equipment and ma-
chines.
the warnings and instructions may result in electric shock, fire and/or serious in-
jury.
Save all warnings and instructions for future reference.
Electric power supply for electrical appliances of class rating II
Note: The rated voltage is indicated on the nameplate of your machine.
Only connect the machine to an exterior area shock-proof plug receptacle with a
corresponding fault current protective switch.
The machine may only be connected to an electric power supply with all machine
parts in proper working condition. Take special notice of the following machine
parts:
Electrical appliances of class rating II have a strengthened or double insulation
(protective insulation). They have no connection to the grounded conductor.
Note: Observe the respective national safety regulations!
WARNING Read all safety warnings and instructions. Failure to follow
Plug.
Power cable over the entire length.
Operator's manual
3 Safety information
17