Advertisement
Using Your Kambrook Pedestal Fan
Before First Use
Remove any promotional material
from fan.
NOTE: Assembly of the fan requires
a Phillips head screwdriver.
WARNING: When
unpacking the fan,
check to see you have
received all the items
listed before discarding
the packaging.
Assembling Your Arctic
Pedestal Fan
1.
Place the motor head and tilt
adjustable head assembly (with
the power cord entry face up)
on a flat surface. Align and insert
the end of the inner extension
tube into the tilt adjustable head
(See Fig. 1).
8
2.
3.
4.
Fig. 1
Fully insert the long screw
into the square hole of the tilt
adjustable head through the
extension tube and the other
end of the tilt adjustable head
(See Fig. 2).
Turn the whole motor head and
extension tube assembly over
without disassembling the long
screw from its place.
Insert and tighten the small
screw and washer into the upper
hole on the tilt adjustable head
(See Fig. 3).
Fig. 2
Fig. 3
Advertisement
