Advertisement
Using Your Kambrook Pedestal Fan
10.
Place the spacer at the centre
of the base between the base
weight and the protrusion of the
extension tube (See Fig. 8).
11.
Place the large washer on
top of spacer and secure the
assembly with the bolt provided
(See Fig. 9).
12.
Tip the whole assembly so that
the unit is standing on its base.
10
13.
Fig. 8
14.
Fig. 9
15.
Continued...
Loosen the height adjustment
knob on the extension tube
and pull up the inner extension
tube to the desired height (See
Fig. 10). Fully tighten the height
adjustment knob to hold the
inner extension tube in place.
Remove the black PVC
protective sleeve from the motor
head shaft. Unscrew the 4 small
screws and washers situated on
the motor head (See Fig. 11).
Separate the blades, front
and rear grilles by opening the
securing clips all around the front
grille and untying the securing
wire away from the fan blades.
Fig. 10
Fig. 11
Advertisement
