Page 2
In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 2738 45 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz...
Page 3
Contents Kambrook Recommends Safety First Your Kambrook 87cm or 114cm Touch Control Tower Fan Quick Start Guide Using Your Tower Fan Care, Cleaning and Storage KTF840_841_WHT_IB_C18.indd 3 19/6/18 1:42 pm...
Page 4
IMPORTANT: Please retain your instruction book for future use. At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.
Return the entire appliance to the nearest authorized Kambrook service centre for examination and / or repair. • Any maintenance other than cleaning should be performed at an authorised Kambrook Service Centre •...
Page 6
Your Kambrook Tower Fan Touch control panel featuring: Carry handle Remote control storage • POWER On/Off button • Fan SPEED button Detachable filter cover (Includes 3 speed settings; Detachable filter low, medium and high) Not Shown • MODE button (includes 3 •...
Page 7
Quick Start Guide Turning the tower fan on MODE MODE TIMER TIMER SPEED SPEED POWER POWER Plug the power cord into a To start the tower fan, turn the The unit will be in NORMAL fan 230V or 240V power point and tower fan on by pressing the mode, at LOW speed setting.
Using Your Kambrook Tower Fan Before first use Hold the base stand piece with the curved side facing towards Remove your tower fan from its carton the bottom part of the tower fan and associated protective wrapping. body, thread the power cord...
Page 9
Using Your Kambrook Tower Fan continued To assemble the KTF841WHT base stand (2 pieces): The tower fan base stand comes in two separate pieces that connect with one another. To assemble the base stand, place the tower fan body on its side.
Using Your Kambrook Tower Fan continued NOTE: To avoid infrared interference that may trigger the operation of the cooling fan, ensure the fan is positioned away from other infrared remote controlled appliances. Turning Your Tower Fan On Fig. 9 To operate the tower fan, plug the...
Page 11
Using Your Kambrook Tower Fan continued Setting the Nature and NOTE: When the NATURE mode Reduction Mode setting is selected, the tower fan is programmed to Your tower fan has a NATURE and REDUCTION setting. self-regulate through the various fan speeds. The NATURE...
Using the Remote Control NOTE: To avoid infrared Before using the remote control, interference that may trigger remove the battery isolating slip the operation of the cooling by pulling the slip away from the fan, ensure the fan is positioned remote control.
Care, Cleaning and Storage Ensure that the tower fan is WARNING: Do not operate switched OFF and disconnected the tower fan without the from the power outlet base stand fitted before cleaning. Use a clean, dry cloth to clean the external surfaces of the tower WARNING: Never insert fan.
Page 14
Care, Cleaning and Storage Cleaning the Filter Fig. 11 Fig. 12 The filter is located behind the rear cover of the fan. To clean the filter: Ensure that the tower fan is switched OFF and disconnected from the power outlet before cleaning.
Page 16
Kambrook - Australia Kambrook - New Zealand Ground Floor, Suite 2, 170-180 Bourke Rd Private Bag 94411 Alexandria NSW 2015, Australia Botany, Manukau Auckland 2163 Locked Bag 2000 New Zealand Botany NSW 1455 Customer Service Line/ Customer Service Line 1300 139 798...
Need help?
Do you have a question about the KTF840 and is the answer not in the manual?
Questions and answers