Advertisement
5.
Secure and tighten the long
screw with the nut knob
(See Fig. 4).
6.
Turn the whole motor head and
extension tube assembly over
again.
7.
Insert and secure the screw knob
into the aperture above the long
screw head (See Fig. 5).
8.
Fig. 4
9.
Fig. 5
Unscrew the bolt at the bottom
of the extension tube and fit the
extension tube into the aperture
located at the centre of the
base (See Fig. 6).
Turn the extension tube and
base assembly over and fit the
base weight to the centre of the
base (See Fig. 7).
Fig. 6
Fig. 7
9
Advertisement
