Package Contents - Insignia NS-SB515 User Manual

Insignia Soundbar with Wireless Subwoofer

Package contents

TOOLS NEEDED
Wall mount template
Drill a hole here
Locate/Position holes onto studs behind
drywall
mounting
Wall Screws (2)
Warning: Improper installation can result in serious injury or
anchors (2) #10 × 1 ½ in. (3.8 cm)
damage to your soundbar.
wood screw (or similar)
If necessary, seek the assistance of a professional.
Soundbar
HOLD THE LEVEL TO THE TOP EDGE OF THIS TEMPLATE
Hold this template in the location you want,
Determine where you would like to mount Wall
and use a level to level it, then tape it to the
the soundbar. The center line of the template
Center Line should match the center of the TV. wall.
Note: If you are mounting to drywall, use a Wall Anchor
studfinder to locate studs. A wall anchor is not
when possible, o r use anchors for - needed if you are attaching to a stud.
Remove the template from the wall.
You must use suitable wall anchors (not
supplied) if you cannot mount the soundbar to
Drill two holes at the indicated points. available wall studs.
Center Line
Scale: 1/1
Wall Mounting Template
Wireless subwoofer
Remote Control and battery
RCA Audio Cable
www.insigniaproducts.com
Wall
Soundbar
Drill a hole here Center Line
1/4 in.
(6 to 8 mm) Wall
Fasten two screws (not supplied) to the wall.
The screw heads should protrude from the wall
approximately 1/4 in. (6 to 8 mm). The screw
width must be about 3/16 in. and the screw Align the speaker hanging brackets with the
head about .3 in. (7.6 mm) to 3/8 in. (9.5 mm). screws, then hang the soundbar on the screws.
User Guide
Quick Setup Guide
AC Adapter
RCA to 3.5 mm Adapter
5