Using the remote control
1 Remove the plastic tab from the battery compartment before using the
remote control for the first time.
2 Point the remote control directly at the IR sensor on the front of the
soundbar. You must be within approximately 23 ft. (7 m) of the soundbar.
Setting up your soundbar
First step - Choosing your connection
•
Look at the back of your sound source device, such as a TV, DVD/Blu-ray
player, or cable box, to identify your audio OUT ports. Choose one
connection option below that fits your audio source. You can connect
several devices and switch the sound source as required.
10
Insignia Soundbar with Wireless Subwoofer
IR Sensor
Cautions
•
Do not spill water or any liquid on the remote
control.
•
Do not place the remote control on a wet
surface.
•
Do not place the remote control in direct
sunlight or near sources of excessive heat.
•
If the remote control is not going to be used for
a long time, remove the battery to avoid any
damage that may be caused by leakage and
corrosion.
Caution
•
Turn off or unplug all devices while you are
making connections.
•
If you mounted your soundbar on a wall, you
must use the included right-angle cable
connectors for the AUX IN or RCA cable
connections.
www.insigniaproducts.com