Insignia Soundbar with Wireless Subwoofer
6 Secure two screws (not included) to the wall or wall anchors (if required).
The screws must protrude from the wall by about 1/4" (6.35 mm). Use a
#10 wood screw (or similar), 1 1/2" (3.8 cm) in length. The screw width
must be about 3/16" (4.76 mm) and the screw head must be
approximately 1/3" to 3/8" (7.6 to 9.5 cm).
7 Align the speaker hanging brackets with the screws, then hang the
soundbar on the screws.
Using your soundbar
This system lets you to access three different sound sources (Source 1 -
Optical, Source 2 - RCA, and
Listening to your soundbar
1 Press the
turns blue (Bluetooth source) or green (RCA/Optical source).
2 Turn on the audio source device connected to your soundbar and begin
playback.
3 Press the
source or press the selected source button on the remote control.
4 Adjust the volume on your soundbar or the audio component to a
comfortable level.
22.2" (56.5 cm)
Warning
- Bluetooth).
(Power) button to turn on your soundbar. The power indicator
button on the soundbar repeatedly to select the audio
Note
Warning
www.insigniaproducts.com
Wall
Improper installation can result in serious injury or
damage to your soundbar. If necessary, seek the
assistance of a professional.
If you use the OPTICAL connection, you must change
your device's audio output setting to "PCM" format.
Refer to the manual you received with the output
device for additional information.
Continuous use of high volume sound may
permanently damage your hearing.
Approx.
1/4"
(6.8 mm)
19