Technical Specifications - Handicare Exigo 20 User Manual

Technical specifications and measurements
The wheelchair is supplied as standard in various different seat heights and seat
widths. Which height suits the user of the wheelchair depends on two factors:
the height of the individual and how the chair will be used. Consult your dealer or
nearest technical aids centre if you are uncertain whether you have the correct
height and width. (All measurements are in centimetres unless stated otherwise.)
Seat width
Seat depth
Seat height
Backrest height
Armrest height
Total height
Transport height
Total width
Transport width
Total length
Transport length
Weight of chair
Transport weight
Max. user weight
The wheelchair and most of the parts are manufactured using a special aluminium
alloy. The backrest and seat are covered with flame-retardant material. The driving
and caster wheels can be supplied with solid or pneumatic tyres as desired.
Under normal use and with prescribed maintenance, the wheelchair's expected
lifespan is approximately seven years.
Waste handling
Waste relating to packaging, parts of the wheelchair or the wheelchair itself can
be treated as general waste. The main component of the wheelchair is aluminium,
which can be melted down for reuse. The plastic and cardboard used in the
packaging can be recycled.
28

Technical specifications

36, 39, 42, 45, 48 and 51 cm
39 cm (adjustable 39–44 cm)
36–48 cm
42–46 cm
22–27 cm
89 cm
89 cm
Seat width + 18 cm
28 cm
97 cm
99 cm
15,9 kg
10.1 kg
140 kg
MB3196-EN