Advertisement
1. Screwdrivers
2. Pliers
3. Modelling Knife
3350mAh - 5550mAh 4S 14.8V Li-Po battery (POWER-TECH 5550mAh 33C 4S 14.8V
recommended Part No. PT-B-3355504S)
Charger (Power-Tech C6, B606 or X-Drive 6 recommended)
2.4GHz Transmitter
2.4GHz Receiver
Self-Adhesive Tape
Thread Locking Compound
Recommended Item:
Servo Tester (Power-Tech, Part No. PT-ACC-ST)
Please ote:
"EPOFLEXY" is a very tough and durable material perfect for the manufacture of model
aircraft. When using screwed fixings with "EPOFLEXY" components it is important to
tighten the screws sufficiently to provide a firm fixing.
Excess tightening could result in the foam material becoming compressed, possibly damaging
or distorting the part. Take care to ensure that all screws are tightened sufficiently to provide
a firm fixing, but do-not over tighten. We recommend that all fixings are checked regularly
for security and safety purposes.
Tools required to complete
4. Scissors
5. Measure or Ruler
Additional items required to complete
3
Advertisement
