Maintenance; Specification - Beamz LCB-384 User Manual

MAINTENANCE

The unit should be cleaned periodically to ensure the optimum performance, the smudginess can
decrease the life of light and the output of light is affected by the dust which can make the machine
overheating. In general, make the maintenance at least two times a month. Be sure to power off the
unit before cleaning .
Do not clean until the unit recovers normal temperature since high temperature for using, use the lens
tissue or soft cotton cloth with alcohol to wipe gently.
Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty
surrounding can cause greater accumulation of dirt on the optics. Never rub or press strongly on the
panel.

SPECIFICATION

Voltage ............... 100-240V AC 50/60Hz
Input current ................................... 0.4A
Power .............................................. 32W
Fuse ..........................................2A 250V
Light source ........................ 384pcs LED
............................................ 128 pcs red
......................................... 128pcs green
............................................ 128pcs blue
Beam Angle ............................. 65° x 30°
Weight ............................................ 2.5kg
Size ................... L965 x W90 x H120mm
‐ 10 ‐