Canon MX520 series Online Manual page 140

2801
Cause
The document is jammed in the ADF.
Action
Remove the document following the procedure below.
Important
The power cannot be turned off while the machine is sending or receiving a fax, or when the received
fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the power
cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.
• If the original remains in the ADF by pressing the Stop button while the machine is
scanning the document:
If you press the Stop button during scanning then the document remained in the ADF, the message
about the paper remained in the ADF appears on the LCD. Press the OK button so that the remaining
document is automatically fed out.
• If the original is jammed in the ADF:
Remove the document following the procedure below.
1. If printing is in progress, press the Stop button.
2. Turn off the machine.
3. If a multi-page document is loaded, remove any pages other than the jammed page from the ADF,
then open the document feeder cover.
4. Pull out the jammed document from the ADF.