Light Bulbs - Zephyr ZSI-E30AS Use, Care And Installation Manual

www.zephyronline.com
REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
ZSI-E30AS-ES & ZSI-E36AS-ES: Access light bulb by removing light bulb lens cover by 1 screw. FIG. B
stops and falls out.
Replacement bulbs are available from Zephyr or specialty lighting stores. See page 17 for ordering information.
ZSI-E30AS & ZSI-E36AS: Purchase type: 50W Halogen, GU-10
ZSI-E30AS-ES & ZSI-E36AS-ES: Purchase type: 13w Fluorescent GU-24, STS T3 13GUS
FIG. B
14