Manitowoc QM30 Series Installation And Use Manual page 20

Maintenance
B. Remove the Overflow Tube
•
To remove the tube, lift it up while using a slight
back and forth motion to loosen it from the drain
hole.
When installing the tube, be sure it is completely
inserted into the drain hole to prevent water leakage
during normal operation.
OVERFLOW
TUBE
DRAIN
HOLE
Removing the Overflow Tube
C. Remove the Vinyl Hose
•
Disconnect the water pump discharge hose from
the distribution tube and water pump.
4-4
D. Remove the Water Pump
•
Disconnect the water pump power cord.
•
Disconnect the water hose from the pump outlet.
•
Loosen the screws that hold the water pump in
place.
•
Lift the water pump and bracket assembly up and
off the screws.
sv1684b
E. Remove the Water Trough
•
Remove the screws holding the water trough to
the walls of the cabinet.
POWER CORD
OUTLET
Removing the Water Pump
Section 4
SCREWS
WATER PUMP
sv1713