Storingchannels In Memory(Optional) - Toshiba 55L7400 User Manual

Setting up yourTV 65
Storing channels in memot T (optiona
3 Press the A/Y (arrow) buttons to select Antenna or Cable.
4 Press the OKbutton.
Storingchannels in memory(optional)
To make sure your TV stops only on the channels you want when you press
the CH A/Y buttons on the remote control or the control panel, store
those channels in the TV's memory.
AutoTuning
NOTE Youmustset up theantenna!cable i nputsource first. See"Initialsetup"on
page 49.
You can set up the TV to detect all active channels in your area and store
them in its memory. Then you can manually store or skip individual
channels from memory.
Option: Description:
Cable Note:If youselectCable, a utotuningdeletes previously stored channels
frommemory.
Thissetuprequires sometime,butyoudo notneed to repeat t hesetup
unless yourcableTVservice's lineupchanges s ignificantly.
Antenna Toskipan antenna source channel andremove it frommemory, s etthe
channel t o beskipped. S ee"Skippingchannels" on page66.
NO'rN Totuneto channels not storedin memory, u sebuttons0-9 andtheDASH
buttonon theremote control.
1 Press the MENU button.
2 Select Installation > Channel Tuning > Auto Tuning, and then
press the OK button.
A confirmation screen appears.
3 Press the OK button to start Auto Tuning or press the EXIT button
to abort.
The TV cycles through the channels and stores all active channels
in memory.
4 To view the progranmaed channels, press the CH A/Y buttons.