Storing Channelsin Memory (Optional); Autotuning - Toshiba 65L5400U Instruction Manual

Se_ingupyourTV 49
Stor#_g c'ham_els it_memol_ (optiot_al)
3 Open the Channel Tuning menu, highlight ANT/CABLE In,
and then press the OK button.
(Sample Image) Cham_el tm_i_g metal - It_put co_figuratio_
selecdo_
4 Press the A/T (arrow) buttons to select the input source (Cable
or Antenna), and then press the OK button to save your new
settings.
Storing cl annels inmemory(opUonal)
To make sure your TV stops only on the channels you want when
you press the A/T (arrow) buttons on the remote control or the
control panel, store those channels in the TV's memory.
AutoTuning
You can set up the TV to detect all active channels in your area and
store them in its memory. Then you can manually add or erase
individual channels from memory.
NOTE ¢. YoumustsetuptheANT/CABLE inputsource before
programming channels. See "ANT/CABLE I N"on page 48.
¢ Theautomatic channel p rogramming process will erase
channels t hatwerepreviously programmed i ntotheTV's
memory.
¢ TotunetheTVtoa channel n otprogrammed i n thechannel
memory, youmustusetheChannel Number buttonsonthe
remote control.
¢ Programming c hannels whentheANT/CABLE inputis
configured for Cable will takesubstantially longerthanwhenthe
antenna inputisconfigured forAntenna. This isnormal;
however, oncechannel p rogramming is finished,youshouldnot
have to repeat t heprogramming process againunless yourCable
TVservice lineupchanges s ignificantly.