Table of Contents
Advertisement
6
Initial Setup and Menu
Pel_rming
the initial set
8
IRBlaster
Select Next or Skip.
olo To start the IR Blaster setup, select Next on the screen, or to
skip the setup, select Skip. If you skip this setup, you can setup
the IR Blaster at any time through the Installation
> IR Blaster
Setup menu.
NOTN
TheIRBlaster maynotworkwithsomedevices, a ndit maynotcontrol
certainfeatures on yourexternal d evices.
Selling the IR Blaster
IR Blaster Setup
1
Select Add onthe screen.
Device Type screen wilt appear.
Device Type
1
Select Device Type, and use the 4/_" (arrow) buttons to select
a device type from the following:
•:.
Cable Box
•:.
Satellite Box
•:.
VCR
o:. Blu-ray, DVD Player
o*,o Receiver, Misc Audio
o:. Amplifier
o:. CD Player
•:.
Video Accessory
2
Press the Y button then press the GREEN button.
The Brand screen wilt appear.
3
Use the &/V (arrow) buttons to select the brand name then
press the OK button.
o:. Select a field and press the OK button to show the
software keyboard. Enter the first few characters of the
brand name and press the GREEN button. The brand
name starting with the entered characters wilt appear on
the Brand screen.
4
Press the OK button.
Model Name screen wilt appear.
Advertisement
Table of Contents
