Storing Channels In Memory (Optional); Autotuning - Toshiba 50L1450U User Manual

2 Settingupyour TV
Auto Tuni_
3 Open the Channel Tuning menu, highlight ANT/CABLE In,
and then press the ENTER button.
(Sample hm_tge) Channel tuning menu - Input configuration
selection
4 Press the A/T (arrow) buttons to select the input source (Cable
or Antenna), and then press the ENTER button to save your
new settings.
Storing channels i nmemory (optional)
To make sure your TV stops only on the channels you want when
you press the A/T (arrow) buttons on the remote control or the
control panel, store those channels in the TV's memory.
AutoTuning
You can set up the TV to detect all active channels in your area and
store them in its memory. Then you can manually add or erase
individual channels from memory.
NOTE o:÷ YoumustsetuptheANT/GABLE i nputsource before
programming channels. See"ANT/GABLE I N"on page 41.
•:- Theautomatic channel p rogramming process will erase
channels t hatwerepreviously programmed i ntotheTV's
memory.
o:- TotunetheTVtoa channel n otprogrammed i n thechannel
memory, youmustusetheChannel Number buttonsonthe
remote control.
•:- Programming c hannels whentheANT/CABLEinputis
configured for Cable will takesubstantially longerthanwhenthe
antenna inputis configured forAntenna. This isnormal;
however, oncechannel p rogramming is finished,youshouldnot
have to repeat t heprogramming process againunless yourCable
TVservice lineupchanges significantly.