Connecting The Drain Hose - LG WTG9532VH Owner's Manual

Connecting the Drain Hose

Before connecting the Drain Hose, check your Drain Hose model and choose the correct instructions.
Pump Model
Fit the end of the drain hose to the outlet of the
drain pump and secure the clamp.
Put the other end of the drain hose over the standpipe or
wash tub.
2
NOTE
To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose guide.
The discharge height should be approximately 0.9 ~ 1.2 m from the floor.
Non-Pump Model
Ensure that the hose clip is set as indicated here.
Before connecting
2
Push the elbow hose toward the body of the wash-
Connect the Elbow Hose
ing machine.
3
To change the direction of the hose, pull out the
Place the Drain Hose
elbow hose and change the direction.
Repeat Step 2.
32
Hose
Guide
Hose
Guide
Hose
Guide
Hose
0.9~1.2m
Guide
Hose
Guide
0.9~1.2m
0.9~1.2m
0.9~1.2m
0.9~1.2m
Clip
Drain Hose
Drain Hose
Drain Hose
Drain Hose
Drain Hose