Smartdiagnosis; Cold Wash - LG WTG9532VH Owner's Manual

SmartDiagnosis

Close the washer door, and press the POWER button to turn on the machine.
(Smart Diagnosis will not operate if the Washer has a power problem.)
Place the phone to the SmartDiagnosis
2
3
Hold down the
4
Hold the phone while data is transmitted.
5
After the data transmission is completed, listen to the diagnosis result from the consultant.
NOTE
Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of
troubleshooting through service calls. The effectiveness of this feature depends upon various factors,
including, but not limited to, the reception of the cellular phone being used for transmission, any
external noise that may be present during the transmission, and the acoustics of the room where the
machine is located. Accordingly, LG does not guarantee that Smart Diagnosis can accurately
troubleshoot any given issue.
38
TM

Cold Wash

button to activate smart diagnosis.
• Do not press any buttons other than the ones
indicated below.
TM
display icon.
• Make sure that the
phones mic faces the
TM
SmartDiagnosis
display
• Place the phone near the
TM
SmartDiagnosis
display, and hold down
the Cold Wash button
until tak tat tak sounds
are heard.
• Keep the phone placed to the SmartDiagnosis
display while data for smart diagnosis is being
transmitted. The time remaining for data
transmission will be displayed on the washer
• Transmission sound may be irritating. For proper
display.
diagnosis, do not remove the phone.
Smart Diagnosis can be cancelled at any time by
pressing the POWER button
• When data transmission is completed, the
power is automatically turned off with "End"
displayed for a few seconds.
TM