Cleaning And Maintenance - LG WTG9532VH Owner's Manual

Cleaning and Maintenance

• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular
Cold water washing
intervals e.g. every 5th wash should be at least a WARM one.
• Turn off taps to prevent the chance of flooding should a hose burst.
When you have finished
• Always unplug the power cord after use.
Turning the washer off from the POWER button does not disconnect the main power.
When water supply into the tub is not clean or the inlet valve filter is clogged with particles (such as sand),
clean the filter in the inlet valve occasionally.
(The image of the power cord and water tap may vary according to the country)
To Clean the Filter in the Inlet Valve
Close the taps. Turn on the washer and
press START/PAUSE. the washer will
attempt to commence washing and release
the water in the inlet valves. When there is
no more water, turn the power off from the
mains outlet switch.
After removing the inlet water
supply hose pull out the filter.
3
Then use a brush to clean the filter.
NOTE
• before reconnecting the inlet hose, turn the tap on for 30 seconds, with the hoses in the sink so
that any impurities in the water line can be flushed out.
To Clean the Pump casing (for pump model)
Remove the power
cord from the power
outlet and place a
towel on the floor
under the drain pump
cap. Excess water
will flow out.
NOTE
• Check for water leaks after refitting by adding a bucket of water into the tub. (The Rubber O ring
must remain in the cap)
Turn the cap
counter- clock-
2
wise and pull it
out while taking
note the config-
uration.
Cap
Cap
Filter
Filter
Turn off the power before
pulling out the cord.
2
Refit the filter after cleaning it and
reconnect the inlet hose as per the
4
installation instructions.
Cap
Cap
Remove any foreign
objects and fluff inside
3
pump casing and from the
filter.
Filter
Filter
Guide rib
Guide rib
Filter
Filter
Refit the cap. Insert the filter along the
guide ribs inside the pump casing.
4
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.
Guide rib
Guide rib
Filter
Filter