Genaray LED-7500T User Manual page 9

· Loosen adjustment locking knob by
twisting counterclockwise and rotate ball
head mount to position light at desired
angle; twist locking knob clockwise to hold
light unit firmly in position
Cold shoe mount can also
be removed to reveal an
Note
integrated1/4 20 threading
mount
· To reveal ball head mount's integrated 1/4
20 threading mount for fastening to tripod,
twist locking ring resting above cold shoe
counterclockwise until entire shoe comes
out; insert 1/4 20 screw found on tripod
head into the 1/4 20 threading mount; then
follow remaining adjustment steps above
9
LED-7500T - USER MANUAL
INTERLOCKING
WITH OTHER
LED DEVICES
· Slide cold shoe mounting into
interlocking expansion slot of another
compatible Genaray LED light device
· To separate stacked units, press down
on the release tab found at the bottom
of the expansion slot to allow the cold
shoe of the other unit to slide out
· Compatible Genaray LED light devices
can be mounted atop one another in a
stacked vertical format for increased
illumination