Table of Contents
Advertisement
Always disconnect the electrical plug from the wall receptacle before
servicing this unit.
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
In case of electrical failure
•
If for any reason a gas control knob is turned ON and there is no electric
power to operate the electronic igniter of the cooktop, turn OFF all gas
control knobs and wait 5 minutes for the gas to dissipate before lighting
the burner manually.
•
To light the burner manually, carefully hold a lighted match to the burner
ports and push and turn the gas control knob to HI until it lights and then
turn the knob to desired setting.
WARNING
Electrical Shock Hazard
7
Advertisement
Table of Contents
