Cooktop Part / Material Suggested Cleaners - Haier HCC2230AGS User Manual

•
After cleaning, place all parts in their proper positions before using cooktop.
The cleaners recommended below and on the following page indicate cleaner
types and do not constitute an endorsement of a particular brand. Use all products
according to package directions.

COOKTOP PART / MATERIAL SUGGESTED CLEANERS

Parts and
Suggested Cleaners
Materials
•
Burner
Damp cloth
Base
(Cast
Aluminum)
•
Gas
Detergent and hot
Spreader
water; rinse and dry.
(Cast
•
Stiff nylon bristle
Aluminum)
toothbrush to clean port
openings.
•
Abrasive cleansers:
Revere ware
polish. Following
package directions Use
Brillo
Rinse and dry.
•
Burner cap Non abrasive cleaners:
and grate
Hot water and
(Porcelain
detergent, Fantastic,
enamel on Formula 409. Rinse and
cast iron)
dry immediately.
•
Mild abrasive cleaners:
Bon Ami
Scrub
•
Abrasive cleaners for
stubborn stains: soap-
filled steel wool pad.
•
Exterior
Hot sudsy water: rinse
finish
and dry thoroughly.
(Porcelain
•
Non abrasive cleansers:
enamel)
Ammonia, Fantastic
Formula 409
•
Mild abrasive cleansers:
Bon Ami
Comet
•
Liquid cleaners: Kleen
King
16
metal
®
or S.O.S. pads.
® ®
and Soft
®
.
®
,
®
.
®
, Ajax ,
® ®
.
®
, Soft Scrub .
® ®
Suggestions/Reminders
•
Keep the gas injector area free
of cleaning agents and any other
material from entering the
injector orifice.
•
Rub lightly, in a circular motion.
•
Aluminum cleaners may dull the
surface.
•
To clean port opening, use a
tooth brush or straightened
paper clip.
•
The grates are heavy; use
care when lifting. Place on a
protected surface.
•
Blisters/crazing/chips are
common due to the extreme
temperatures on grate fingers
and rapid temperature changes.
•
Acidic and sugar-laden spills
deteriorate the enamel. Remove
soil immediately.
•
Abrasive cleaners, used too
vigorously or too often, can
eventually mar the enamel.
•
Acidic and sugar-laden spills
deteriorate the porcelain
enamel. Remove soil
immediately.
•
Do not use wet sponge or towel
on hot porcelain.
•
Always apply minimal pressure
with abrasive cleaners.