Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Haier HCG604W
Summary of Contents for Haier HCG604W
-
Page 1: Installation Instructions
Installation instructions Gas cooktops User guide HCG604W models NZ AU... -
Page 3: Table Of Contents
The models shown in this user guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed on the back cover or contact your local Haier dealer. -
Page 4: Safety And Warnings
This product should not be sealed into the bench with silicone or glue. Doing so will make future servicing difficult. Haier will not be liable for costs associated with releasing such a product, nor for repairing damage that may be incurred in doing this. -
Page 5: Electrical Requirements
Safety and warnings No combustible material or products should be placed on this product at any time. Do not spray aerosols in the vicinity of this product while it is in operation. Installation must be carried out according to the manufacturer's instructions. Incorrect installation may cause harm and damage to people, animals or property, for which the manufacturer accepts no responsibility. - Page 6 Safety and warnings Safety and warnings Operation WARNING! Hot Surface Hazard This appliance becomes hot during use. Do not touch the cooktop components, burners, trivets, pan supports or the base when hot. Before cleaning, turn the burners off and make sure the whole cooktop is cool. Failure to follow this advice may result in serious injury.
-
Page 7: Important Safety Instructions
Safety and warnings Safety and warnings Important safety instructions Operation Household appliances are not intended to be played with by children. Children, or persons with a disability which limits their ability to use the appliance, should have a responsible person to instruct them in its use. The instructor should be satisfied that they can use the appliance without danger to themselves or their surroundings. -
Page 8: Installation Instructions
Installation instructions Dimensions and clearances This cooktop has been designed and constructed in accordance with the following codes and specifications: AS4551-2008 Approval Requirements for Domestic Gas cooking appliances AS/NZS 60335-1 General Requirements for Domestic electrical appliances AS/NZS 60335-2-6 Particular Requirements for Domestic electrical cooking appliances AS/NZS CISPR 14.1:2010 Electromagnetic Compatibility Requirements. - Page 9 Installation instructions Installation clearances and protection of combustible surfaces shall comply with the current local regulations e.g. AS/NZS 5601.1 - Gas Installations code. Fig. 2 Clearances Spacer Double-sided Adhesive tape Fig. 3 Mounting the base clearance spacers...
- Page 10 Installation instructions Fastening the installation brackets Each cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to benches from 20 to 40 mm thick. Remove the pan supports and burners from the cooktop. Turn the cooktop upside down and place it on a soft surface. Fasten the brackets “A”...
- Page 11 Installation instructions Connecting the cooktop to the gas supply The gas connection must be carried out by an authorised person according to the relevant standards. Before connecting the appliance to the gas supply, mount the brass conical adaptor onto the gas inlet pipe, upon which the washer has been placed (Figs.
- Page 12 Installation instructions Leak-testing and flame-testing the cooktop After connecting the gas supply, check the piping and connections for leaks using a soap and water solution. The presence of bubbles indicates a leak. Tighten or replace connections as appropriate. Important! Do not use any naked flame to check for leaks. The operation of the appliance MUST be tested before leaving.
- Page 13 Installation instructions Converting to a different gas type Important! The conversion procedure must be carried out only by an authorised person. This appliance is suitable for use with Natural gas or LPG (check the “gas type” sticker attached to the appliance). To convert from one gas type to another, you need to replace the injectors, and then adjust the minimum burner setting.
- Page 14 Installation instructions Adjusting the minimum burner setting When changing from one type of gas to another, the minimum valve output must also be correct, considering that in this position the flame must be about 4 mm long and must re- main lit even when the knob is turned quickly from the maximum to the minimum position.
- Page 15 Installation instructions Fig. 12 Wiring diagram Wiring diagram Ignition switches group Ignition coil Terminal block Spark electrode...
-
Page 16: Introduction
About your new cooktop Thank you for buying a Haier gas cooktop. Once it is installed and ready to use, you will want to know everything about it to make sure you get excellent results right from the start. This guide introduces you to all its special features. -
Page 17: Using Your Cooktop
If the flames are accidentally extinguished, turn off the burner and do not try to light it again for at least one Fig. 15d Pushing then turning the control minute (to allow the gas to disperse). knob (models HCG604WFCW, HCG604W- FCX with flame failure safety feature) -
Page 18: If There Is A Power Failure
Using your cooktop If a burner does not light Turn the control knob to (off ) and wait at least 1 minute before trying again. This is to allow the gas to disperse. If after trying again the burner still does not light, check that: the cooktop is plugged in and the power supply is switched on there is no power failure in your home or neighborhood the gas is turned on... -
Page 19: Cooking Guidelines
Using your cooktop Cooking guidelines Important! Never leave the cooktop unattended when in use. Boilover causes smoking and greasy spills that may ignite. Take care when deep-frying: oil or fat can overheat very quickly, particularly on a high setting. Start cooking on a high setting. When food comes to the boil, reduce the setting and maintain a steady heat to cook your food thoroughly. -
Page 20: Care And Cleaning
Care and cleaning Important! Before any cleaning or maintenance, always: turn all burners off switch the power to the cooktop off at the wall make sure that the cooktop and its parts are a safe temperature to touch. General advice Clean the cooktop regularly—do not let stains become burnt on. - Page 21 Care and cleaning How? Important! What? How often? Wipe with a damp cloth and mild Do not use stainless steel or oven Control knobs detergent. cleaner on the knobs, as doing so Dry thoroughly with a soft cloth. may damage their coating. As needed Make sure you keep the Remove the parts that you wish to clean.
- Page 22 Care and cleaning Replacing the burner parts correctly Semi-rapid and auxiliary burners Flame spreader Flame failure probe (flame failure models only) Fig.22 Correct positioning of semi- rapid and auxiliary burner parts Ignitor Triple-ring wok burner Fit the flame spreader to the housing as shown by the arrow in Fig.23 following. Make sure the burner is not able to rotate.
-
Page 23: Troubleshooting
Troubleshooting Problem Possible solutions A burner does not light. Check that the power to the cooktop is switched on at the wall and there is no power failure. Check the gas supply valve is turned on and the supply to the house is working. -
Page 24: Warranty And Service
Warranty and service Before you call for service or assistance ... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: Your product is correctly installed. You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to the Service &... - Page 28 Copyright © Fisher & Paykel/Haier 2015. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available.