HOLT HI?1590 User Manual page 21

Hide thumbs Also See for HI?1590:

program has been loaded you can power down the board and re power the board and the

program should run automatically without the debugger. Holt HI‐1590 project loaded with

CodeWarrior 5.9.0.

Freescale MC9S12XDT512xxx Development Tools

The Freescale microcontroller data sheet and other documentation can be found at this link:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=S12XD&tid=16bhp

If these links become out of date go to: http://www.freescale.com/ , then search for information on

"S12XD: 16‐Bit Automotive Microcontroller".

A Free 32K limited version of the Code Warrior IDE from Freescale is available:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=CW‐HCS12X&tid=CWH#

The US Multilink debugger cable used for this project is:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=USBMULTILINKBDM&parentCod

e=S12XD&fpsp=1

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=USBMULTILINKBDME‐ND

References:

http://www.holtic.com/

AN‐1590, Rev. New

HOLT INTEGRATED CIRCUITS

10/10/14

Table of Contents