Tools Required; Parts List; Installation Tasks, Time, And Items Required - IBM SAN768B-2 Installation, Service And User Manual

Table 3. Installation tasks, time, and items required (continued)
Installation task
Installing the rack mount kit
Mounting and securing the
SAN768B-2 in the rack
Installing power cables and
powering on the SAN768B-2
Establishing serial
connection, logging on to the
SAN768B-2, and configuring
IP addresses.
Installing an Ethernet cable,
opening a Telnet session, and
configuring the SAN768B-2
domain ID, date and time,
and additional system
parameters. Verifying and
backing up the configuration.
Installing transceivers as
needed
Attaching fiber optic cables,
cable wraps, and cable
guides
Disassembling and packing
the lift tool
Note: Assembly instructions for the lift tool are in the shipping container.

Tools required

You will require the following items to install the SAN768B-2 in the cabinet:
v Torque wrench with #2 Phillips screwdriver tip
v Flathead screwdriver
v Lift tool

Parts list

The following parts list refers to items illustrated in Figure 3 on page 17
Table 4. Items supplied with the 14U rack mount kit
Item Description
For all types of installations
Time estimate
30 minutes
30 minutes
20 minutes
20 minutes
20 minutes
30 minutes (longer if using
high density port blades)
2-3 hours
20 minutes
Chapter 2. Installing and removing a SAN768B-2
Items required
Torque wrench with #2
Phillips screwdriver tip
Flathead screwdriver
Torque wrench with #2
Phillips screwdriver tip
Lift tool and load plate
Power cables
Serial cable (provided in the
accessory kit). Workstation
computer with a serial port
or terminal server port and a
terminal emulator
application (such as
HyperTerminal). Ethernet IP
addresses for the chassis and
for both control processor
blades (total of 3 IP
addreses).
Ethernet cable for Telnet
access. Refer to the Fabric OS
Administrator's Guide.
SFP+, mSFP, and QSFP
optical transceivers as
needed.
Fiber optic cables and cable
wraps.
No special tools required.
Quantity
15