Table of Contents
Advertisement
40 EVEP613SB, EVEP615SB, EVEP616BB, EVEP618BB, EVEP623SB, EVEP626BB
USING THE APPLIANCE
IMPORTANT!
Pre-heating
Pre-heating the oven is recommended in several cooking
and grilling functions. Pre-heating the oven allows it to
reach the required temperature quickly and efficiently as
well as cook food at the correct temperature for the entire
cook time.
These models are equipped with a built-in rapid heat up
mode that activates each time you start an oven function.
During the rapid heat-up mode the heat comes from the
element surrounding the fan as well as the smaller element
above the food. This combination will heat up the oven
30% quicker than it would on standard 'Bake' function.
The oven will automatically revert to the set cooking
function once the preset temperature is reached.
Cooling / Vent fan
The appliance is fitted with a cooling fan. This prevents
the kitchen cabinet from overheating and reduces the
condensation inside the oven. It will operate whenever
the oven is in use and blow warm air across the top of the
oven door.
Note: If the oven is still hot from cooking, the cooling fan
will keep running to cool the oven down and will switch off
by itself once cool.
Condensation
Excess condensation may fog the oven door. This may
happen when cooking large quantities of food from a cold
start. Minimise condensation by:
•
Keeping the amount of water used whilst cooking to a
minimum.
•
Making sure the oven door is firmly closed.
•
Baking custard in a baking dish that is slightly smaller
than the water container.
•
Cooking casseroles with the lid on.
Note: If using water in cooking, this will turn to steam
and may condense outside your appliance. This is not a
problem or fault with your oven.
Cooking with the timer
The oven is equipped with a programmable controller that
can be used to turn the oven on and off automatically. The
'cook time' controls are used to automatically turn the oven
off after a set amount of time. The 'Delay End' controls are
used to set the time of day you want the cooking cycle
to finish.
Setting the cook time
1.
Select the desired oven function and cooking
temperature.
2. Touch the 'cook time'
symbol as often as necessary
(or hold), until the desired cook time has been set.
3. Touch 'OK' or after 8 seconds from the last time
adjustment the oven will start cooking and the 'cook
time' display will countdown to zero.
4. The oven will turn off and beep when the 'cook time'
display reaches zero.
IMPORTANT!
•
When you use the 'cook time' function, the 'Finishes
at' display activates and tells you what time of day the
oven will turn off (based on the set cook time)
•
During cooking, you can adjust the cook time with
the 'cook time'
or
symbols for better cooking
performance.
•
When the cook time has elapsed, an audible signal
will sound for 2 minutes, the oven will switch off and
COOKING FINISHED will be displayed.
•
To stop the audible signal, press any of the symbols
on the control panel.
•
If you wish to cook a bit longer, press the 'cook time'
symbol for each additional minute you require.
The oven automatically reverts to the function and
temperature previously programmed. This feature is
available for 5 minutes after cooking has finished.
After that, the oven automatically switches off.
EVEP613SB, EVEP615SB, EVEP616BB, EVEP618BB, EVEP623SB, EVEP626BB 41
USING THE APPLIANCE
Setting the delay end time
The delay end function can be used to switch the oven on
and off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and cooking
temperature.
3. Set the required cook time.
4. Touch the 'delay end' symbol
to move the end time.
5. Touch 'OK' or after 8 seconds from the last time
adjustment the SET icon will light and the oven is now
programmed. The oven will start its cooking cycle to
finish at the set 'end time'.
6. When the oven has finished cooking, cook time can
be extended or the beeper turned off just as in 'cook
time' mode.
7. Touch the 'delay end'
symbol to move the end time
forward.
8. Touch 'OK' or after 8 seconds from the last time
adjustment the SET icon will light and the oven is now
programmed.
The oven will commence its cooking cycle to finish at the
set 'end time'
IMPORTANT!
•
30 seconds after a cooking function has started, it is
no longer possible to delay the end time.
•
In order to delay a cooking function that has already
started, the oven needs to be switched off then
switched on again and re-programmed.
•
Even though the heating element turns off the oven
will still retain substantial heat. This will continue to
cook the food until it is removed or the oven cools
down. If you do not plan on being present when the
oven turns off, you should take this extra heating
time into account.
Timers
The appliance has two timers which can be used one at a
time. The count up timer can be used to measure a period
of time. The count down timer beeps at the end of a
preset time.
Setting the count up timer
The timer can be used independently of the oven for
measuring a count up period. There is no alert provided
with this timer.
1.
Touch either 'timer'
or
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. To begin the count up timer press OK.
4. To reset the count up timer, press 'timer'
once to
show 00min. Press OK to restart.
5. To cancel the count up timer press 'timer'
twice.
Setting the count down timer
The timer can be used independently of the oven for
setting a count down period. When the period of time has
elapsed, an audible signal sounds.
1.
Touch either 'timer'
or .
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. Touch the 'timer'
to set the countdown period.
4. The timer bell icon
will flash.
5. To begin the count down timer press OK or wait 8
seconds. When the timer starts, the bell will stop
flashing and the timer will begin to count down.
6. When the set time has elapsed, an audible signal will
sound for 2 minutes. The time indication '00min' and
the timer bell will flash on the display.
7. To stop the signal, touch either of the 'timer'
or
symbols .
8. To cancel the count down timer touch 'timer'
until
the normal time of day is displayed.
Hide quick links:
Advertisement
Table of Contents
