How To Use - Makita JS3200 Instruction Manual

How
to
use
Shear blade inspection
.Be sure to check for blade wear before operation. Use of a worn blade results in a ragged
shearing surface and poor shearing performance, so replace blades beforehand.
Blade replacement
.Use the hex wrench provided to remove
the hex socket head bolts securing the
upper and lower blades.
0
Rotate both shear blades 90" (above and
below) to position to unworn portion of
blades. When all four portions are worn,
of course, the blades should be replaced
with new ones.
.Tighten the hex socket head bolt holding
the upper blade using the hex wrench
provided. Press up on t h e shear blade
while doing so.
-After securing the shear blades, be sure
that there is no gap left between the
inclined surfaces of the shear blade and
the blade holder.
Hex wrench
,
Blade holder
Hex socket hd bolt
@
allowed o clearance
Shear blade
4