Makita JS3200 Instruction Manual page 6

Switch operation
.To start the tool, simply pull the trigger.
Release the trigger to stop. For contin-
uous operation without having to keep
your finger on the trigger, just pull the
trigger and then push in the lock button
with your thumb. To stop the tool from
the lock position, simply pull the trigger
again and release it.
Tensile
Materials strength
(kglmm'
1
Mild steel
(A) 4 0
Hard steel
( 6 ) 6 0
Stainless steel
60
Permissible shearing thickness
.The groove on the yoke serves as a thick-
ness gauge for shearing mild or stainless
steel plate. If the material fits within the
groove, it i s shearable.
Max. cutting
thickness
(mm)
3.2 ( 1
/8")
2.5 (3/32")
2.5 (3/32")
.The thickness of materials to be sheared
depends upon the type (strength) of the
material. The maximum shearing thick-
ness is indicated in the table on the right
in terms of various materials. Attempting
to shear materials thicker than indicated
will result in tool breakdown and/or pos-
sible injury. Keep within the thicknesses
shown a t right.
.
I S 0
ASTM AIS1
BS
DIN
Lock button
-
NF JIS
( A )
( 6 )
Aluminum plate
I
25
I
4.0 (5/32")
3574-76 A109-72 1012
1449Part 1-72 1624-77 A36-401-80 SPC
R683 A576 1055 070M55 CK55 xc55 s55c
6