Makita JS3200 Instruction Manual page 3

replaced by an authorized service center unless otherwise indicated elsewhere in this
instruction manual. Have defective switches replaced by authorized service center.
Don't use tool
if switch does not turn
it
on
and
off.
19. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
sur-
faces. For example; pipes, radiators, ranges, refrigerator enclosures.
20. REPLACEMENT PARTS. When servicing, use only identical replacement parts.
SAVE THESE INSTRUCTIONS.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure
the voltage supplied is the seme as that specified on the nameplate of the tool. A power source w i t h
voltage greater than that specified for the tool can result in SERIOUS INJURY to the user
-
as well as
damage
to the tool.
If in doubt, DO
NOT PLUG I N THE TOOL. Using a power source w i t h voltage
less than the nameplate rating is harmful to the motor.
Shear & Standard Equipment
Trigger
-
Plate
t h i c k n e s s gauge
F
Shear b l a d e
Hex wrench
I n r k
hiittnn
Thickness gauge
3