Mounting The Toothed Belt And Adjusting The Tension; Mounting The Belt Guard Of The Fl Ange Motor - Pfaff 571 Instruction Manual

Installation and commissioning
8

Mounting the toothed belt and adjusting the tension

.02.03
● In this position fi t toothed belt 1.
● Swing the bearing plate 2 of the motor, so that the toothed belt is tensioned.
● In this position tighten screws 3.
8 Mounting the belt guard of the fl ange motor
.02.04
24
Fig. 8 - 06
1
Fig. 8 - 07
3
3
● Attach belt guard 1 with screws 2 and 3.
2
3
1
2