Removing / Inserting The Bobbin Case; Inserting The Bobbin Case / Adjusting The Bobbin Thread Tension - Pfaff 1181 Instruction Manual

9

Removing / Inserting the bobbin case

.03
Fig. 9 - 03
9

Inserting the bobbin case / Adjusting the bobbin thread tension

.04
1
Fig. 9 - 04
1
2
Switch off the machine!
Danger of injury due to uninten-
tional starting of the machine!
Removing the bobbin case:
●
Tilt back the machine.
●
Raise latch 1 and remove bobbin case 2.
Inserting the bobbin case:
●
Press bobbin case 2 until you feel it snap
into the bobbin case base.
Return the machine to its up-
right position using both hands!
Danger of injury by crushing
between the machine and the
table top!
●
Insert the bobbin into the bobbin case.
●
Pass the thread through the slot under
the spring according to Fig. 9-04.
●
Pass the thread through the notch.
●
Adjust the thread tension by turning
screw 1.
When the thread is pulled, the
bobbin must rotate in the direc-
tion of the arrow.
Preparation
29