20. value of coin 2
Entering set up mode.
You will see LqC1
Press the Whites button.
Press the Colors or the Perm.Press button until
Press the START button.
Press the Colors or the Perm.Press button until
Press the START button.
Display previous Coin 2 value.
Press Colors(+) or Perm.Press(-) button to select value of coin 2.
(The value can be set from 0 to 9.95 in 5¢ increments.)
Press the START button.
The machine sets up the value of Coin 2, then advances to the next process
automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
NOTE
• Coin 2 is available for E-suds system
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Whites button twice.
PROGRAMMING MODE - SETUP MODE
Button
appears in the display.
appears in the display.
51
Display