Programming Mode - Setup Mode; How To Change Regular Price - LG GCW1069CS Owner's Manual

Setup Mode :
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
- Coin type – Turn on/off toggle switch.
- Card type – Insert the service card.
- OPL type – Push "Whites" + "Perm.Press" and the '3'.
- Then, the washer displays

1. how to change regular price.

Entering set up mode.
You will see LqC1
Press the Whites button.
Press the Colors or the Perm.Press button until
Press the START button.
Press the START button.
Display previous regular price.
Press Colors(+) or Perm.Press(-) button to set the regular price.
(The vend price can be set from 0 to 9.95 in 5¢ increments.)
Press the START button.
The machine sets up the regular price, then advances to the next process
automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
(display)
.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type/Coin type - Push the Whites button twice

PROGRAMMING MODE - SETUP MODE

Button
appears in the display.
25
Display