64
PROGRAMMING MODE - COLLECT MODE
PROGRAMMING MODE -
Collect information data :
The washer collects the usage data so that the owner can check various information like number of various cycles used, how
many times card or coins used, etc.
Entering the collect mode
Data Name
Entering
1. Entering the programming
the collect
mode.
mode
2. Whites
3. Colors(+), Perm.Press(-)
4. START
5. Colors(+), Perm.Press(-)
6. START
7. Whites
❖ Check the collect information reference to the follow lists. The Lists are displayed by abbreviations.
COLLECT MODE
(display)
Button
Display
xxxx
xxxx
Description
Insert service card(card type), turn on/off toggle switch (Coin type).
Press the Whites button until
Press the Colors(+), Perm.Press(-) button until
the display.
Enter the Collect information data.
Move to each data list that you want to check by pressing with
Colors(+) or Perm.Press(-) button.
Display the value of selected data list
Move to upper level or Comes back to Idle State
appears in the display.
appears in