Tub Clean - LG GCW1069CS Owner's Manual

7. TUB CLEAN -

To clean up the tub, please run the TUB CLEAN cycle.
Entering set up mode.
You will see LqC1
Press the Colors or the Perm.Press button until
Press the START button.
Press the Colors button until
Press the START button, then tub clean reset is done.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
NOTE
• Never load laundry while using TUB CLEAN. The laundry may damage or become contaminated. Make sure to clean the
washer tub when it is empty.
• It is recommended to leave the door open after finishing the laundry to keep the tub clean.
• It is recommended that TUB CLEAN should be repeated monthly.
• Safely and conveniently secure the door slightly ajar with a magnetic door plunger. This will promote air circulation and
allow the interior of the machine to dry.
is displayed.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type – Push the Whites button twice.
PROGRAMMING MODE - TEST MODE
Button
appears in the display.
appears in the display.
63
Display