Password - LG GCW1069CS Owner's Manual

62
PROGRAMMING MODE - TEST MODE

6. PASSWORD -

How to change the password.
Entering set up mode.
You will see LqC1
NOTE
• Default password is 3.
If you want to change the password, you should know the present password.
Press the Colors or the Perm.Press button until
Press the START button.
Press the Colors button until
Set up the number you want
By pressing Colors or the Perm.Press button.
For example, If you want to change password number to No5
Press the Colors button until "
Press the START button, then Password change is done.
is displayed.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type – Push the Whites button twice.
Button
appears in the display.
appears in the display.
" appears in the display.
Display