Programming Mode -Setup Mode; How To Change Regular Price - LG F1069FD2P Owner's Manual

26 26
PROGRAMMING MODE - SETUP MODE PROGRAMMING MODE - SETUP MODE
PROGRAMMING MODE –SETUP MODE
Setup Mode :
You can change washer vend price, cycle time, and cycle parameters, etc.
Entering setup mode
- Coin type – Turn on/off toggle switch.
- Card type – Insert the service card.
- OPL type – 1) Push the Hot & Cold button at the same time.
2) Push the Warm button 3 times.
- Then, the washer displays

1. how to change regular price.

Entering setup
mode.
You will see LqC1
(display)
.
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Start button.
Display previous regular price.
Press Warm(+) or Cold(-) button to set the regular price.
(The vend price can be set from 0~10.00 in 0.1£
increments.)
Press the Start button.
The machine sets up the regular price, then advances
to the next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button twice.
Button Display
appears