Table of Contents
Advertisement
1. Insert the power cord into a power outlet.
2. If the TV is in standby mode, press the POWER
button on the remote control or on the bottom
panel of the TV.
3. Normal pictures will appear on the screen after about 15 seconds. If there
is no signal input, then "NO SIGNAL" will appear on the screen.
4. If temporary POWER off is required, press the POWER button on the
remote control or on the bottom panel of the TV.
5. If you want to completely switch off the power of the TV for an extended
period of time, unplug the power cord.
6. After switching the unit off, you should wait at least 5 seconds before
turning it on again.
RED: in standby mode
GREEN: in power on mode
If there is no signal, the TV will automatically enter standby mode after 10
•
minutes.
In VGA mode, if there is no operation, TV will enter standby mode after 15
•
seconds.
The picture and sound settings, plus preset channels will be memorised at the
point when the TV is turned off. When the TV is started up again, it will resume
with these settings.
16
Advertisement
Table of Contents
