Table of Contents
Advertisement
Caution: Pulling, pushing or climbing on the TV may cause it to fall. Be careful to
ensure that children do not hang on the TV or otherwise destabilise it, as doing
so may cause the TV to fall over, causing injury or even death.
Your LED TV is able to accommodate wall mounting with the use of a wall
mount bracket (not supplied), and the mounting holes on the back of the unit.
We recommend removing the TV stand prior to wall mounting the TV. Please
see the previous page for instructions on removing the stand.
How to mount the LED TV.
1. Please ensure that the distance of wall-mounting holes is 200mm or
400mm on the back cabinet before you mount your TV on the wall.
2. Mark the horizontal distance screw holes A and B with a pencil on the wall
by using a long wall-mounting bracket as a ruler (There will be a "0"
engraved in the middle of the long wall-mounting and "200" engraved on
the end, as shown.)
3. Align the upper holes on the short wall-mounting bracket (5) to A and B,
then mark the vertical distance screw holes C and D with a pencil on the
wall, as shown.
4. Drill the holes at A, B, C and D positions on the wall.
5. Drive the nylon sleeves (6) into the screw holes on the wall.
6. Fasten the short wall-mounting bracket (5) on the Nylon sleeves with self-
tapping screws (4) on the wall.
7. Fasten long wall-mounting bracket (2) with screws (3) into the two screw
holes on the rear cabinet (place the long wall-mounting end with the hook
upper).
8. Lift the TV and hang it on the wall. This will require more than one person.
:
Ensure the wall can support the weight of the TV and the mount combined.
•
Be careful not to scratch the panel when you fasten the screws to the TV.
•
29
Advertisement
Table of Contents
