Basic Operation - Kogan KALED40XXXTB User Manual

Basic Operation

QUICK START GUIDE
• Connection
1. Connecting the mains and antenna.
2. Press Power button on the remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language
Press the◄/►button to select the desired OSD (On Screen Display) language.
Mode Setting
Press the◄/►button to select Home Mode or Store Mode.
Country
Press the◄/►button to select the country.
Auto Scan
Press the◄/►button to select mode: DTV+ATV, DTV, ATV.
Turning on and off
• Turning the TV on
Connect the AC input cable.
button on remote control can turn on TV from standby mode.
• Turning the TV off
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode,
if there is no signal in 15 minutes, the TV will turn off automatically. In PC mode, the
set will automatically turn off in 5 minutes with no input signal. When VGA cable is
TV
connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 23): Press 2 and 3 within a short time.
If TV has a power switch, turn it on firstly.
_________
8
Press the