Summary of Contents for Kogan Agora KALED423DSMTZB
Page 2
· Turn off the power switch immediately; · Disconnect the power plug from the power outlet; · Contact the Kogan customer service centre. Never attempt to make repairs yourself because this could be dangerous. Never push objects of any kind into the set...
Page 3
Important Safety Instructions and Maintenance Important Safety Instructions Do not push or scratch the front filter, or place any objects on top of the TV set. The image may be uneven or the screen may be damaged. To avoid the fire, no naked flame source, such as lighted candles, should be placed on the apparatus.
Page 4
Important Safety Instructions and Maintenance Installation Do not place the set on an unstable cart, stand, table or shelf. The set may fall, causing serious personal injury as well as damage to the product. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
Page 5
Important Information Keep small accessories out of reach of children so they are not mistakenly swallowed. Table of Contents...
Page 6
Accessories Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. HOME User Manual Not Included Remote Control Note: Detail operation please refer to HELP menu on the TV.
Page 7
Introduction Features TV adopts 42" TFT display screen Zero X radiation complies to green environment protection requirement Connect to computer directly to realize TV/monitor combo. MHL 2.0 Android 4.2 USB3.0 16:9 wide screen ...
Introduction Specifications KALED423DSMTZB Model Display size 42” Diagonal max.) 1920 x 1080 LED panel resolution Speaker output power Power supply ~110-240V, 50/60Hz Digital: DVB-T TV receive system Analog: PAL: BG, I, DK, SECAM: BG, D/K Analog: Antenna: Frequency range 46.25MHz-855.25MHz...
Stand and wall- mounting instructions (optional) How to assemble the stand If you need to remove or assemble the stand please read the following instructions. - Before attaching/detaching the stand, make sure to turn off the TV. - Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged.
Page 10
Stand and wall- mounting instructions (optional) How to mount the LED TV on the wall 1.After detaching the stand, fasten 2 mounting screws into the 2 screw holes on the rear cover, see the figure below. 2.Fasten wall mounting bracket with screws on the wall. 3.Carefully check for the strength before releasing the LED TV.
General Description Overview of back panel You can connect the TV with video devices such as DVD/VCD player, VCR and video camera to enjoy the high quality picture. USB 2 USB 1 Headphone Microphone Video output SPDIF DVD player DVD player Blu-ray disc player Camcorder PC (HDMI-output)
General Description Overview of front panel The buttons on the lower-left panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. INPUT MENU PROG MASTER POWER SWITCH PROG/ Press this button to turn TV on or off.
General Description Overview of Remote Control 1. INPUT: This button is used to switch among different sources: DTV, ATV, AV, YPbPr, VGA, HDMI1, HDMI2, HDMI3. Select a source and press OK button to confirm. 2. POWER: Press this button to switch to standby mode, and press it again to turn TV on.
Page 14
General Description Overview of Remote Control 17. HOME: Press this button to enter the main interface directly. ASPECT: Press this button to switch the screen mode. VOL and VOL: Press these buttons to adjust TV volume. 20. PROGand PROG: Press these buttons to change the channel upward or downward.
Page 15
General Description General Description Teletext Teletext is an information system broadcast by certain channels which be consulted like a newspaper. It also offers to subtitles for viewers with hearing problems or who are not familiar with the transmission language. You can press these buttons to operate the teletext: Text Press TEXT button to enter or exit teletext mode.
Page 16
General Description Teletext Cancel The CANCEL button will exit from any Teletext on the display. Press CANCEL button again to exit Teletext and return to live TV broadcast. Subtitle Turning the Teletext subtitles on or off. Subtitles is a separate mode with only a few buttons available.
General Description Installing Batteries in the Remote Control Installing Batteries Open the battery compartment cover on the back side. Insert two 1.5V AAA size batteries in correct polarity. Don´t mix old or Point the remote towards the remote used batteries with new ones. control sensor of the TV and use it within 8 meters.
External Connection Connecting VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system. VCR Rear Panel AUDIO OUT ANT ANT OUT S-VIDEO TV Rear Panel...
External Connection Connecting a Camcorder The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. Each Camcorder has a different back panel configuration. When connecting a Camcorder or DVD, match the color of the connection terminal to the cable.
External Connection Connecting DVD Player/Set-Top Box via HDMI This connection can only be made if there is a HDMI Output connector on the external device. DVD Player/ TV Rear Panel Set-Top Box HDMI Cable (Not supplied) What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression.
External Connection Connecting Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Digital Audio System TV Rear Panel (Black) Coaxial Cable (Not supplied) 5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. 1.
External Connection Connecting PC White D-Sub Cable (Not supplied) Each PC has a different back panel configuration. The HDMI jacks do not support PC connection. 1. Connect a D-Sub Cable between VGA/PC IN connector on the TV and the PC output connector on your computer.
Basic Operation Turning the TV On and Off How to turn the TV on or off 1. Insert the power cord plug into a polarized AC outlet. 2. If TV is in standby mode, press POWER button on button on the bottom panel of the remote control or the LED TV.
Basic Operation Menu operation The main interface ou will enter the main menu directly after the TV is turned on. Arrow buttons: Select menu and the selected menu's background will be orange. OK button: Enter the options which you've selected. INPUT button: You will enter the relevant function options directly.
Page 25
Basic Operation Menu operation Applications of the TV Application menu shows all those applications which came with the TV, along with those that you've downloaded. Menu Button: Open or Close the app's menu Exit Button: Return to the main menu Arrow Button: Select the application which you want OK Button: Enter the application you've selected.
Menu system instruction TV Menu Sound Image Program Input Source Function Time Menu button: Open the TV menu. Exit button: Close the TV menu. Arrow buttons: Select the application which you want. OK button: Enter the selected application settings menu. Note: Enter the function option by click the status bar.
Page 27
Menu system instruction Sound Equalizer 1. Press ▲/▼ key to select an equalizer item. Equalizer 2. Press OK key to enter the equalizer submenu 120Hz The sound settings can be adjusted to suit your 500Hz user preferences. 1. Press ▲/▼ key to select a particular item. 1.5KHz 2.
Menu system instruction Image Picture Mode Dynamic Aspect Ratio 16:9 Color Temp Cool Backlight Window Adjust Picture Mode Your TV has five picture settings (Standard, Soft, Vivid, User, Dynamic) that are preset at the factory. Only "User" mode can be set to your preference by adjusting particular items such as Contrast, Brightness,Color,Sharpness,Tint.
Menu system instruction Program Auto Search ATV Manual Search DTV Manual Search Program Edit Signal Information Auto Search Search Type ATV/DTV Press / key to select "Auto Search" option. Then Australia Bulgaria Denmark press OK key to start a notice window. In this notice Austria Croatia Finland...
Menu system instruction Program DTV Manual Search DTV Manual Search In the ATV/DTV source, you can choose “DTV Manual Search” to enter “DTV Manual Search” menu. CH37 You can use /button to choose the channel and Search press OK button to search, and then the TV will store Signal Strength the DTV channel if there is a DTV signal present.
Menu system instruction Input Source There are two ways to select input source. 1.Input Setup Press INPUT key on the remote control to enter "INPUT SOURCE" menu. These options for you to select: DTV, ATV, AV, YPbPr, VGA, HDMI1, HDMI2, HDMI3. Use key to move the cursor to the input you desired and press OK key to confirm.
Page 33
Menu system instruction Function enter password" menu will appear, enter your 4-digit Lock (the default password password to enter " Lock " submenu Lock System is 0000, whereas the uneditable master password Set Password is 1980). Block Program Lock System Parental Guidance 1.
Menu system instruction Function Screen Saver This option is only used in ATV mode. 1.Press / key to select “Screen Save” option. 2.Press / to choose on or off. Noise Reduction 1. Press/key to select "Noise Reduction" option. 2.
Menu system instruction Time Off Time Off Time In "Off Time" item, press OK button to enter the submenu, Switch set the time to turn off the TV set. Time 00:00 Sleep Timer 1. Press / key to select "Sleep Timer" option. 2.
Menu system instruction “ ” to Select Disk: Press “OK” button to enter submenu and press choose the disk for PVR. Time Shift Size: Press “OK” button to enter submenu and press / “ ” to choose the size. Format: Press “OK” button to enter format submenu. The disk must be formatted when first used for PVR.
Page 37
Menu system instruction DTV EPG (Electronic Program Guide) In DTV mode, press “GUIDE” button to enter the Electronic Program Disabled At Guide menu, press "RED” button to "Record" Setting. 2007-01-18 16:01 Thursday Friday Saturday Sunday Monday Tuesday Wednesday 9 Nine Digital 16:00 THE SHAK 90 Nine Digital HD Record Setting...
Digital Media Player Introduction This TV is embedded with one USB port digital media player. It can find devices that support USB1.1/2.0/3.0, including flash disk, USB hard disk and digital camera. It supports functions as: Display pictures, Play music files, Play video files. Note: please do not remove the cable during the data transfer.
Digital Media Player USB support character 1. Photo Press menu button to play/exit the "photo menu". Those menu items from left to right function as the following in turn: a. Wallpaper b. List c. Prev d. Play/Pause e. Next f. Stop g. Sequence h.Anticlock .Clockwi j.
Page 40
Digital Media Player USB support character 3. Movie Press menu button to play/exit the "movie menu". Those menu items from left to right function as the following in turn: a. Prev b. Pause/Play c. Next d. Stop e. Advanced setting Prev Advanced setting Pause/Play...
Page 41
Digital Media Player USB support character Select the Sub Channel item and press OK to open the Sub Channel selection menu. Press / key and press OK to select a channel. “ ” YPbPr HDMI1 HDMI2 HDMI3 3D Left Right 3D Up down 3D -Off 3D - 2D...
If you have any problem, check the couter measures for each symptom listed below. The following symptoms may have been caused by inappropriate adjustment rather than actual malfunction of the unit. If the trouble persists, contact the Kogan Customer Care Centre for more information.
Page 43
Troubleshooting Check your area is covered by Digital Video Broadcasts. After Auto Tuning only Try re-tuning or manually tuning missing channels. some channels are Check that you are using the correct antenna type - please available see pg.16 'Antenna connection'. Check if the channel has been blocked in the main menu Channel cannot be settings.
Page 44
Troubleshooting Picture defects and the reason Ghosting may also occur when still pictures are displayed continuously. It may disappear after a few moments.