Balance; Auto Volume; Surround Sound; Spdif Mode - Kogan KALED43SMTZA User Manual

If the volumes of the left speaker and the right speaker are not the same, you
can adjust the "Balance" to suit your personal preference.
▲ ▼
1. Press / key to select "Balance" option.
◀ ▶
2. Press / key to decrease or increase the value of the item.
Each broadcasting station has its own signal conditions, and it is inconvenient to
adjust the volume every time the channel is changed. "Auto Volume"
automatically adjusts the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the sound output when
the modulation signal is low.
▲ ▼
1. Press / key to select "Auto Volume" option.
◀ ▶
2. Press / key to select "On" or "Off".
This is used to turn on surround sound to gain better sound effect.
▲ ▼
1. Press / key to select "Surround sound" option.
◀ ▶
2. Press / key to select "On" or "Off".
This is used to select "SPDIF Mode". This option is only used in HDMI\DTV
mode.
▲ ▼
1. Press / key to select "SPDIF Mode" option.
◀ ▶
2. Press / key to select "RAW", "PCM" of "OFF".
This option is only used in HDMI mode.
▲ ▼
1. Press / key to select "HDMI Sound" option.
◀ ▶
2. Press / key to select HDMI Sound mode, HDMI or VGA.
Your TV has five picture settings (Standard, Soft, Vivid, User, Dynamic) that are
preset at the factory. Only "User" mode can be set to your preference by
adjusting particular items such as Contrast, Brightness, Color, Sharpness, Tint.
▲ ▼
Press / key to select "Picture Mode" option.
◀ ▶
Press / key to select one picture mode.
21