Table of Contents
Advertisement
which can vary in reception quality, digital channels must have perfect reception
quality or you will not receive them at all. So, unlike analogue channels, you are
not able fine tune a digital channel. If the signal strength indicates that the signal
is weak, a possible solution is to adjust your antenna to increase the signal
strength. Continue to adjust the antenna until you find the best position with the
strongest signal.
Press INPUT on the remote control to enter the "INPUT SOURCE" menu. These
options will be available for you to select from: DTV, ATV, AV, YpbPr, VGA,
HDMI1, HDMI2 or HDMI3. Use / to move the cursor to the input you desire and
press the OK button to confirm.
1. Press the "Enter" key to select the "System Lock" submenu.
◀ ▶
2. Press / to select "ON" or "OFF".
The lock feature requires a Password to be entered before any settings can be
changed.
1. Press / ▲ ▼ key and select "Lock" under the "Function" menu.
2. Press OK key to enter "Lock" submenu. "Please enter
password" menu will appear. Enter your 4-digit
password to enter "Lock" submenu. (the default
password is 0000, while the uneditable master
password is 1980).
1. Press OK to select "Set Password" option.
2. Enter your current 4-digit password. Then choose
any 4-digits for your new password and enter them.
As soon as the 4 digits are entered, the cursor will
move to the "Confirm password" field. Re-enter the
same 4 digits again, and your new password will
have been memorized.
◀ ▶
24
Advertisement
Table of Contents
