Accessories; Using Lesswater And Energy; Checkyourventsystemforgoodairflow - Maytag YMET3800XW1 Use And Care Manual

ACCESSORIES
Enhance your washer with these premium accessories.
For more high-quality items or to order, call 1-800-901-2042,
or visit us at www.maytag.com/accessodes. In Canada
call 1-800-807-6777, or visit us at www.whirlpoolparts.ca.
8212526 Washer drip tray, fits under all
31682 AIFpurpose appliance cleaner
k1903WH Laundry supply storage cart J
This washer does not include inlet water hoses.
See Installation Instructions for installation accessories.
USING LESSWATER AND ENERGY
This washer is designed to use less water and energy, and complies
with all 2011 energy standards. Wash cycles with controlled
temperatures are designed to maintain cleaning performance while
using less water and energy compared to older traditional washers.
As a result, water levels will be lower, and hot and warm wash
temperatures may not be as warm as you are used to.
Traditional washer Reduced water washer
CHECKYOURVENTSYSTEMFORGOODAIRFLOW
f
Maintain good airflow by:
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or fire.
Good airflow
Along with heat, dryers require good airflow to efficiently dry
laundry. Proper venting will reduce your drying times and
improve your energy savings, See Installation instructions,
The venting system attached to the dryer plays a big role in
good airflow,
Service calls caused by improper venting are not covered by
the warranty and will be paid by the customer, regardless of
who installed the dryer,
[] Cleaning your lint screen before each load,
[] Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material,
(102 ram)
t
[] Use the shortest length of vent possible,
[] Use no more than four 90 ° elbows in a vent system;
each bend and curve reduces air flow,
[]
[]
Be
Remove lint and debris from the exhaust hood.
Remove lint from the entire length of the vent system
at least every 2 years, When cleaning is complete, be
sure to follow the Installation instructions supplied with
your dryer for final product check.
Clear away items from the front the dryer,
Use Sensor Dry cycles for better fabric care and energy savings
Use the Sensor Dry cycles to provide the most energy savings and enhanced fabric care from the dryer, During Sensor Dry cycles,
drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts off
when the load reaches the selected dryness, The Energy Preferred cycle will provide optimal energy savings,
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to
over-drying, Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
4