Kyocera FS-3040MFP Service Manual page 92

Item No.
U917 Setting backup data reading/writing
Description
Retrieves the backup data to a USB memory from the machine; or writes the data from the USB
memory to the machine.
Purpose
To store and write data when replacing the control PWB.
Method
1. Press the power key on the operation panel, and after verifying the power indicator has gone
off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
Wait for 10 seconds to allow the machine to recognize the USB memory.
4. Enter the maintenance item.
5. Press the start key.
6. Select [Export] or [Import] using the cursor up/down keys and press the start key.
Display
IMPORT
EXPORT
7. Select the item using the cursor up/down keys.
Display
ADDRESS
BOOK
JOB ACCNT.
ONE TOUCH
USER
PROGRAM
DOCUMENT
BOX
FAX
FORWARD
* : Since data are dependent with each other, data other than those assigned are also
retrieved or written in.
8. Select [ON] using the cursor left/right keys.
9. Press the start key. Starts reading or writing.
The progress of selected item is displayed in %.
When an error occurs, the operation is canceled and an error code is displayed.
10. When normally completed, [FIN] is displayed.
11. Turn the main power switch off and on after completing writing when selecting [IMPORT].
Description
Description
Writing data from the USB memory to the machine
Retrieving from the machine to a USB memory
Description
Address book
Job accounting
Information on one-touch key
User managements
Program information
Document box information
FAX transfer information
1-3-64
Depending data
-
-
Address book
Job accounting
Job accountings and user manage-
ments
Job accountings and user manage-
ments
Job accountings, user managements
and document box information
2LW/2LX