Kyocera FS-3040MFP Service Manual page 41

Item No.
U034 Adjust Paper Timing Data
Description
Adjusts the leading edge registration or center line.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and
original.
Make the adjustment if there is a regular error between the center lines of the copy image and
original.
Method
1. Press the start key.
2. Select the item to be adjusted.
LSU Out Top
LSU Out Left
Adjustment: [LSU Out Top]
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
Display
Top
MP Tray
Cassette
Duplex
5. Change the setting value using the cursor left/rigrt keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
Leading edge
registration
(20 ± 1.0 mm)
6. Press the start key. The value is set.
Display
Leading edge registration adjustment
Center line adjustment
Description
Paper feed from MP tray
Paper feed from MP tray
Paper feed from cassette
Duplex mode (second)
Correct image
Description
Description
Setting
range
0 to 1180
-70 to 70
-70 to 70
-70 to 70
Output
example 1
Figure 1-3-2
1-3-13
2LW/2LX-6
Initial Change in
setting value per step
221 1dot
0 1dot
0 1dot
0 1dot
Output
example 2