Functional Description - Makita 4323 Instruction Manual

FUNCTIONAL
DESCRIPTION
1
1. Lock button
2. Switch trigger
1
1. Speed adjusting dial
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
002707
CAUTION:
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
2
position when released.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
Speed adjusting dial
002710
The tool speed can be infinitely adjusted between 500 and
3,100 strokes per minute by turning the adjusting dial. Higher
speed is obtained when the dial is turned in the direction of
number 6; lower speed is obtained when it is turned in the
direction of number 1.
Refer to the table to select the proper speed for the work-
piece to be cut. However, the appropriate speed may differ
with the type or thickness of the workpiece. In general, higher
speeds will allow you to cut workpieces faster but the service
life of the blade will be reduced.
Workpiece to be cut
Stainless steel
Wood
Mild steel
Aluminum
Plastics
Number on adjusting dial
5 - 6
3 - 6
3 - 4
3 - 6
1 - 4